Fault Description: When the servo system detects that the current is too high during the startup or running, the system will automatically stop working. At this time, Err-01 will be displayed on the display Err-01.

Note: If the main voltage is not normal, it will cause a 01 fault. It is necessary to measure whether the external voltage is normal with a multi meter.

1. Due to improper installation position of the motor lenticular sheet, the position of the lenticular sheet can be slightly adjusted to eliminate the fault (or replace the 720-line lenticular sheet).

2. If the lenticular sheet still reports a 01 fault after adjustment, replace the board.