This unit must have a secure protective ground wire.

1. Plug in the power supply, turn on the red rectangular power switch, and the switch indicator lights.

2. Connect the air pressure of 6 kg - 8 kg to the air inlet of the air filter regulator. The cylinder works and the heating plate rises.

3. Adjust the set temperature of the digital display thermostat. After the temperature reaches the set temperature, you can start working at this time.

4. Set the time relay to the desired time.

5. Press the red round button to rotate the green switch to the left and the machine to auto. Push the work table left and right. After the set position, the machine starts to work. After the set time, the machine automatically returns to the position and completes the work.

Note 2

The work station is not in the set position and the machine does not work.

6. Press the red round button to rotate the green switch to the right and the machine to manual. That is, after pushing the worktable to the set position from left to right, the green switch is rotated to the right to work. After the set time, the hot plate is returned, and the green switch is rotated to the left to stop 6 work.

7, the red round button for the "emergency stop" button button automatically pops open, you can start working again