If you’re a starter with no single clue how to use your printing device, below is a universal guide for you:

1. Firstly, you ought to power your machine. All heat press machines are compatible with the standard 220V electric socket. Just plug in the machine and turn it on by simply flipping the ON/OFF switch.

2. Next, adjust the thermostat settings by turning the knob to the right until the red heating light appears.

3. Once the thermometer reads the correct temperature value for your transfer, you can now turn the knob back to the left until the heating light goes off. Note that this light will go on and off to maintain your preferred transfer temperature.

4. If your machine comes with a digital timer, start it by pressing its button. When you hear the alarm, press stop to reset the timer.

5. Lift up the machine handle to open your press and set it ready for printing.

6. Assuming you want to print a tee and you already have a transfer paper containing the artwork to be printed with you lay out the garment on the machine. Lay the transfer paper onto the t-shirt while facing down.