Can be used to install rims, ribbons, sequins, rope buckles, etc. with a maximum width of 5mm.

1.Before installing the presser foot, loosen the screw on the presser foot and insert the braid along the guide groove on the presser foot.

2.Slide the guide groove on the presser foot forward and backward to adjust the position suitable for the competition of the braid.

3.Tighten the screw and pull the braid to the rear of the guide groove;

4.Attach the braid presser foot to the sewing machine

5.Select the zigzag stitching, and adjust the stitching competition to slightly compete with the size of the knitting competition.

6.Start sewing and fix the braid to the desired position of the fabric.